A suspended roller coaster with 780m of track and 32.83m height, carrying 20 riders per cycle. Suits parks seeking a high-capacity, medium-thrill attraction with a compact footprint.
Figures below are the design values for this model. Site-specific engineering is confirmed per project.
Coaster · custom layout
A coaster is bought on three numbers — height, throughput and the size of the plot you can give it. Everything else, from inversions to train theming, is negotiated after those three are fixed.
The Suspended Roller Coaster is a high-capacity ride with a 780m track and a 32.83m high point. Trains carry 20 riders per cycle, with two seats per car across ten cars. The suspended design lets cars swing outward through turns, giving riders a free-hanging sensation. It suits park developers and investors looking for a medium-thrill coaster that handles steady visitor flow without a large footprint.
The ride is engineered for a 16-year design life. The track layout, train configuration and structural design are developed for each project. We do not publish proprietary engineering details such as steel grades or foundation loads; these are shared with qualified buyers under agreement.
All designs are made to the standards required by your market, confirmed per project.
The ride requires a footprint of 152 x 73m. This includes the station, track envelope and clearances. Site preparation, foundation design and installation planning are handled per project, taking local soil and climate conditions into account. Our team provides layout drawings and technical documentation to support your planning and permitting process.
Installation is carried out by our technicians or by your local contractor under our supervision. We supply assembly instructions, commissioning checks and operator training. The 210 kVA power supply should be confirmed with your electrical engineer during site planning.
Riders must be adults or children at least 1.4m tall. Each car seats two riders. The ride cycle is approximately 140 seconds, including loading and unloading. Daily checks and periodic maintenance are required as set out in the maintenance manual.
Throughput depends on station staffing and dispatch procedures. The 16-year design life assumes the ride is operated and maintained within the specified parameters. Spare parts and technical support are available throughout the life of the ride.
For a layout proposal and technical discussion, contact our project team with your site details and visitor profile.
The questions park developers ask most about this ride — answered without the sales language.
Riders must be adults or children at least 1.4m tall. There is no upper age limit, but riders must be able to secure themselves in the seat. Each car seats two riders side by side. Our operating manual provides full rider restrictions for your park's safety policy.
The ride carries 20 riders per cycle, with a cycle time of approximately 140 seconds. Actual hourly throughput depends on station staffing, loading efficiency and dispatch intervals. Under typical operating procedures, the ride can accommodate a steady flow of visitors. We can help you plan station layout to suit your expected attendance.
The ride requires a footprint of 152 x 73m, including the station and track clearances. A power supply of 210 kVA is needed. Foundation design is project-specific and depends on local soil conditions. We provide layout drawings and technical documentation to assist with your site planning and permitting.
Read before you request a quote
Tell us about your project. Our engineering team will respond within 24 hours.
Certificates & factory
Certificates, process photography and cabin hardware are reviewed once here rather than repeated on each product page. Everything below is our own — no third-party stock.
Originals are issued per project; scans below are current. Tap any document to read it.
Design, fabrication, finishing, installation and shipping — photographed on our own floor and on site.
Observation cabins and coaster cars share one fabrication line — the same mould shop builds both.
Observation cabinPanoramic glass6–8 ridersLaminated glass, ambient lightSignature wheel
Observation cabinRound capsule4–6 ridersGRP shell, any RALStandard wheel
Observation cabinSquare cabin4 ridersAluminium frame + GRPCompact wheels
Observation cabinTimber-look4–6 ridersWood grain print, matteHeritage zones
Observation cabinShaped shell2–4 ridersSculpted GRP, glossThemed parks
Observation cabinNovelty barrel2–4 ridersSculpted GRP, glossF&B brands
Observation cabinCharacter shell4 ridersSculpted GRP, multi-colourFamily zones
Observation cabinPastel capsule4 ridersGRP, soft-touch paintKids areas
Coaster carOpen bench 4-abreast4 per carGRP body, padded seatsFamily coasters
Coaster carLaunch train4 per carNose cone + lap barLaunch coasters
Coaster carThemed moulded2–4 per carSculpted GRP shellStory-driven rides
Coaster carAnimal character2 per carSculpted GRP, glossFamily / kids
Coaster carRacing style4 per carWraparound seatThrill coasters
Coaster carAquatic theme2 per carSculpted GRPWater zones
Coaster carSuspended2–4 per carOver-shoulder restraintInverted / suspended
Coaster carCharacter train2 per carSculpted GRP, multi-colourThemed family coasterFactory & projects
42 photographs from our own fabrication hall, our installation crews and the parks that run our rides — manufacturing, quality control, shipping, commissioning and after-sales.
